Televes

Radome enclosed low visual impact antenna, specifically designed for locations where aesthetics play an important role. Ideal for building fronts, historic buildings, protected areas and even single-family homes (balconies). It is a 7-element Yagi directional antenna, manufactured using Microstrip technology for UHF and BIII printed dipole.
Improved BIII response: Under difficult reception conditions, BIII reception can be improved by extending the telescopic antennas.

The BOSS Tech system automatically controls the level of the received signal (either very high or very low) to always provide optimal output level. The new design using TForce technology makes this intelligent device even more versatile.

RED compliant

Offset aluminium satellite dish for the reception of satellite signals.
Provides an outstanding performance against corrosion, thanks to the aluminium reflector and the stainless steel screws.
The structure was designed to make the mounting easier.

L-type tubular bracket for antenna wall mounting (screw mounting), and 284 mm separation. The tube's diameter is 35 mm (Ø 35 mm), and it is 1.5 mm thick. Steel mast with an outstanding resistance to corrosion, thanks to the double treatment consisting in galvanizing and reactive coating proccess (RCP). 

L-type tubular bracket for antenna wall mounting (screw mounting), and 380 mm separation. The tube's diameter is 45 mm (Ø 45 mm), and it is 1.5 mm thick. Steel mast with an outstanding resistance to corrosion, thanks to the double treatment consisting in galvanizing and reactive coating proccess (RCP) 

Single universal LNB converter, equipped with a single output and the four polarity/band combinations (Hh, Hl, Vh, Vl).
Supplied in individual packing. 

Quad LNB converter, equipped with four universal outputs, each with the four polarity/band combinations (Hh, Hl, Vh, Vl). Supplied in individual packing. 

Quatro LNB converter, equipped with four outputs, each with one specific polarity/band combination (Hh, Hl, Vh, Vl). Each output is marked with the respective colour: black for Vl, red for Vh, yellow for Hh, and green for Hl.
Supplied in individual packing. 

Wideband LNB converter, characterized by a single local oscillator. It captures the entire frequency spectrum of a satellite and transmits it through two otputs (V-H) in a frequency range between 290 and 2340 MHz. 

Avant X Basic: Filtered Amp. (32 filters) 5i/1o: FM-DAB/VHF+UHF-3xVHF+UHF G 29-72/75-75dB Max Vo 122dBµV

Avant X Basic-Sat: Filtered Amp. (32 filters) 6i/2o: FM-DAB/VHF+UHF-3xVHF+UHF-SAT
G 25-68/71-71-41dB Max Vo123dBµV

Avant X Pro: Filtered Amp. (32 filters) 5i/1o: FM-DAB/VHF+UHF-3xVHF+UHF
G 29-72/75-75dB Vo 122dBµV

Avant X Pro-SAT: Filtered Amp. (32 filters) 6i/2o: FM-DAB/VHF+UHF-3xVHF+UHF-SAT
G 25-68/71-71-41dB Max Vo 123dBµV

Gain 116dBuV Output Level. Signal Detection LED. 12Vdc Pre-amp

2-way splitter with F connectors, for SMATV signals. It presents low through losses thanks to the miniaturization applied to the electronic components, which improves its electrical behavior. In addition, its Zamak chassis provides great shielding.

3-way splitter with F connectors, for SMATV signals. It presents low through losses thanks to the miniaturization applied to the electronic components, which improves its electrical behavior. In addition, its Zamak chassis provides great shielding. 

4-way splitter with F connectors, for SMATV signals. It presents low through losses thanks to the miniaturization applied to the electronic components, which improves its electrical behavior. In addition, its Zamak chassis provides great shielding. 

6-way splitter with F connectors, for SMATV signals. It presents low through losses thanks to the miniaturization applied to the electronic components, which improves its electrical behavior. In addition, its Zamak chassis provides great shielding. 

8-way splitter with F connectors, for SMATV signals. It presents low through losses thanks to the miniaturization applied to the electronic components, which improves its electrical behavior. In addition, its Zamak chassis provides great shielding. 

2-way tap with F connectors, for SMATV signals. Its tap losses (12dB) make it suitable for installation in floor 1. 

2-way tap with F connectors, for SMATV signals. Its tap losses (16dB) make it suitable for installation in floors 2 & 3.