Extenders

The AU-11CA-4K22 Audio Embedder enables you to insert an external audio signal into any HDMI source signal.

The AU-11SA-4K22 advanced digital audio decoder is designed to de-embed 2-channel or multi-channel audio from the connected HDMI input and breakout this audio to provide 7.1 analogue audio connections, plus a 5.1 optical audio output and a HDMI bypass output.

CYP PU-304-KIT is designed to send digital audio signals over 150m over CAT5e/6 cable infrastructure. This device supports both Coaxial and Optical signals and can transmit these signals up to 150m. The PU-304-KIT can be powered using a USB cable or the supplied PSU adaptor for added flexibility in a compact design. Digital SPDIF signals are supported up to a sample rate of 96Khz, and support for Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.

CYP PU-515PL-RX HDMI over Single CAT5e/6/7 HDBaseT™ LITE Receiver with PoC and 2-Way IR (up to 60m)

The AU-11CD-4K22 is an advanced solution for repeating HDMI with integrated Audio de-embedding, up to 5.1. Connect the AU-11CD-4K22 between your source and display via HDMI, and select the audio format required. This device supports 4K resolutions, HDMI 2.0 and HDCP 2.2 enabling flexible audio signal management from ultra high definition video signal paths. The built-in HDMI repeater function allows users to extend the transmission distance of up to 4K2K@60 resolutions a further 5m from the device HDMI output.  

The AU-A220 is a compact 2 channel Digital Amplifier perfect for providing high quality audio distribution into various AV zones within any multi-room installation. This advanced solution can integrate digital and analogue audio signals from AV sources within the rack enclosure, or receive an audio input from a compatible matrix to distribute the audio to a variety of zones. The small form factor of the amplifier makes it the ideal solution to be placed within a rack enclosure or behind a display in a local zone if required.

The AU-A220 is also compatible with the RAX-300 series, offering installers increased flexibility when mounting multiple units in a rack enclosure. Up to 4 amplifiers can also be powered by a RAX-PSU-24V. Input selection and volume control is possible via the front panel buttons or RS-232 control.

SDV-C2-TX is designed for high-quality, IP routable, AV extension over a 10G IP Network with minimum latency. By using a sophisticated ultra-light compression scheme (lossless for most content) it’s a great solution for extending 4K audio/video streams (HDMI or DisplayPort) & data. 

The AU-DTI4-TX is a 4-channel analogue audio to Dante output transmitter. Thanks to the integrated support for Dante technology, which extends and routes audio across standard Ethernet networks, this unit forms an important part of an easier and more flexible system for managing large audio systems than traditional point-to-point physical wiring.

AU-DTO4-RX is a Dante input to 4-channel analogue audio output receiver. Thanks to the integrated support for Dante technology, which extends and routes audio across standard Ethernet networks, this unit forms an important part of an easier and more flexible system for managing large audio systems than traditional point-to-point physical wiring.

The OR-DT42-4K22 integrates Dante® technology into a 4×2 HDMI Matrix. It is a high performance HDMI switch which provides 4K UHD+ (18Gbps) HDMI matrix routing and integrated Dante®/AES67 network audio support, including insertion and extraction.

The PU-305BDA-TX is an analogue Stereo over CAT5e/6/7 Transmitter which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m.