Televes
Patch-cord RJ45 S/FTP Cat 6A Cu LSFH 0.5m Grey
Preconnected Ethernet patch cord with RJ45 connector at each end. It is made of a Category-6A data cable, S/FTP type (foiled pairs and foiled cable), with a flexible copper inner conductor 26 AWG and outer sheath made of grey LSFH (Low Smoke Free of Halogen).
Sign in for pricingPatch-cord RJ45 S/FTP Cat 6A Cu LSFH 1m Grey
Preconnected Ethernet patch cord with RJ45 connector at each end. It is made of a Category-6A data cable, S/FTP type (foiled pairs and foiled cable), with a flexible copper inner conductor 26 AWG and outer sheath made of grey LSFH (Low Smoke Free of Halogen).
Sign in for pricingPatch-cord RJ45 S/FTP Cat 6A Cu LSFH 2m Grey
Preconnected Ethernet patch cord with RJ45 connector at each end. It is made of a Category-6A data cable, S/FTP type (foiled pairs and foiled cable), with a flexible copper inner conductor 26 AWG and outer sheath made of grey LSFH (Low Smoke Free of Halogen).
Sign in for pricingPatch-cord RJ45 S/FTP Cat 6A Cu LSFH 3m Grey
Preconnected Ethernet patch cord with RJ45 connector at each end. It is made of a Category-6A data cable, S/FTP type (foiled pairs and foiled cable), with a flexible copper inner conductor 26 AWG and outer sheath made of grey LSFH (Low Smoke Free of Halogen).
Sign in for pricingPatch-cord RJ45 S/FTP Cat 6A Cu LSFH 5m Grey
Preconnected Ethernet patch cord with RJ45 connector at each end. It is made of a Category-6A data cable, S/FTP type (foiled pairs and foiled cable), with a flexible copper inner conductor 26 AWG and outer sheath made of grey LSFH (Low Smoke Free of Halogen).
Sign in for pricingSmall Wall L type bracket - 60cm & 80cm Dishes - 284x194 / Ø35x1.5mm
L-type tubular bracket for antenna wall mounting (screw mounting), and 284 mm separation. The tube's diameter is 35 mm (Ø 35 mm), and it is 1.5 mm thick. Steel mast with an outstanding resistance to corrosion, thanks to the double treatment consisting in galvanizing and reactive coating proccess (RCP).
Sign in for pricingTeleves 144223 Diginova-Boss Antenna
Radome enclosed low visual impact antenna, specifically designed for locations where aesthetics play an important role. Ideal for building fronts, historic buildings, protected areas and even single-family homes (balconies). It is a 7-element Yagi directional antenna, manufactured using Microstrip technology for UHF and BIII printed dipole.
Improved BIII response: Under difficult reception conditions, BIII reception can be improved by extending the telescopic antennas.The BOSS Tech system automatically controls the level of the received signal (either very high or very low) to always provide optimal output level. The new design using TForce technology makes this intelligent device even more versatile.
RED compliant
Sign in for pricingTeleves 714101 5x2-dSCR (SkyQ)
Televes 714101 Multiswitch equipped with 5 inputs (one passive terrestrial and the four polarities of one satellite), which user outputs are compliant with SCR I (EN50494) and SCR II (EN 50607) and the legacy mode, which makes it compatible with any new or existing set top boxes. SkyQ Compatible.
Sign in for pricingTeleves 714102 5x4 dSCR (SkyQ)
Televes 714102 Multiswitch equipped with 5 inputs (one passive terrestrial and the four polarities of one satellite), and 4 user outputs that are compliant with SCR I (EN50494), SCR II (EN 50607) and legacy mode, which makes it compatible with any new or existing set top boxes. SkyQ Compliant.Sign in for pricingTeleves 714103 5x8-dSCR (SkyQ)
Televes 714103 Multiswitch equipped with 5 inputs (one passive terrestrial and the four polarities of one satellite), and 8 user outputs that are compliant with SCR I (EN50494), SCR II (EN 50607) and legacy mode, which makes it compatible with any new or existing set top boxes. SkyQ Compatible.
Sign in for pricingTeleves 714104 5x12-dSCR (SkyQ)
Televes 714104 Multiswitch equipped with 5 inputs (one passive terrestrial and the four polarities of one satellite), and 12 user outputs that are compliant with SCR I (EN50494), SCR II (EN 50607) and legacy mode, which makes it compatible with any new or existing set top boxes. Compatible with SkyQ.Sign in for pricingTeleves 714105 5x16-dSCR (SkyQ)
Televes 714105 Multiswitch equipped with 5 inputs (one passive terrestrial and the four polarities of one satellite), and 16 user outputs that are compliant with SCR I (EN50494), SCR II (EN 50607) and legacy mode, which makes it compatible with any new or existing set top boxes. SkyQ Compatible.Sign in for pricingTeleves 714508 Amplifier-10/11db
Amplifier equipped with 5 inputs (one terrestrial and the four Quattro polarities of one satellite) compatible with EuroSwitch and NevoSwitch ranges, that allows increasing the number of users in the installation while optimizing the signal received by each of them. Amplification around 10 dB for terrestrial, and 11 dB for satellite.
Sign in for pricingTeleves 714509 Launch Amplifier-27 /31db
Amplifier equipped with 5 inputs (one terrestrial and the four Quattro polarities of one satellite) compatible with EuroSwitch and NevoSwitch ranges, that allows increasing the number of users in the installation while optimizing the signal received by each of them. Amplification around 27 dB for terrestrial, and 31 dB for satellite.
Sign in for pricingTeleves 714905 5x10 Splitter
NevoSwitch splitter equipped with 5 inputs (one terrestrial and the four polarities of one satellite) that allows the division of the received signals into two identical parts. 4 dB through losses (both for terrestrial and satellite)
Sign in for pricingTeleves 719501-5x4-Cascadable Multiswitch
Compact and effective for large installations
Compact multiswitch equipped with 5 inputs (one terrestrial, and the four polarities of one satellite) and 4 user outputs.
Thanks to its great compactness and its optimized electronic design, it presents very low through and tap losses. This allows to reduce the number of amplifiers needed in the cascade and to obtain a better balanced signal in the users, even in large collective installations.
Can be used as a terminal (star topology) or as a cascade by using a simple switch. In addition, it incorporates a second switch that actives the TForce technology, which automatically adjusts the terrestrial signal and keep it constant despite variations in the reception.
RED compliantSign in for pricingTeleves 719502 5x6-Cascadable Multiswitch
Compact and effective for large installations
Compact multiswitch equipped with 5 inputs (one terrestrial, and the four polarities of one satellite) and 6 user outputs.
Thanks to its great compactness and its optimized electronic design, it presents very low through and tap losses. This allows to reduce the number of amplifiers needed in the cascade and to obtain a better balanced signal in the users, even in large collective installations.
Can be used as a terminal (star topology) or as a cascade by using a simple switch. In addition, it incorporates a second switch that actives the TForce technology, which automatically adjusts the terrestrial signal and keep it constant despite variations in the reception.
RED compliantSign in for pricingTeleves 719503 5x8 Cascadable Multiswitch
Compact and effective for large installations
Compact multiswitch equipped with 5 inputs (one terrestrial, and the four polarities of one satellite) and 8 user outputs.
Thanks to its great compactness and its optimized electronic design, it presents very low through and tap losses. This allows to reduce the number of amplifiers needed in the cascade and to obtain a better balanced signal in the users, even in large collective installations.
Can be used as a terminal (star topology) or as a cascade by using a simple switch. In addition, it incorporates a second switch that actives the TForce technology, which automatically adjusts the terrestrial signal and keeps it constant despite variations in reception.
RED compliantSign in for pricingTeleves 719504 5x12 Cascadable Multiswitch
Compact and effective for large installations
Compact multiswitch equipped with 5 inputs (one terrestrial, and the four polarities of one satellite) and 12 user outputs.
Thanks to its great compactness and its optimized electronic design, it presents very low through and tap losses. This allows to reduce the number of amplifiers needed in the cascade and to obtain a better balanced signal in the users, even in large collective installations.
Can be used as a terminal (star topology) or as a cascade by using a simple switch. In addition, it incorporates a second switch that actives the TForce technology, which automatically adjusts the terrestrial signal and keeps it constant despite variations in reception.
RED compliantSign in for pricing