By adjusting the physical characteristics of the polyethylene
terepthalate filaments, the engineers at Techflex have produced a
product with the same specifications of our PT with the unique
advantage of being able to cut the material with ordinary scissors and
still maintain an extraordinarily fray-resistant end.
FLEXO CLEAN CUT (CC) is ideal for field installers and other situations where access to a hot knife is impossible. CC's fray-resistant properties allows frequent expansion at the cut end without unraveling. When cut with a hot knife, CC produces a virtually frayless end.
Features:
- Resists Fraying When Cut With Scissors
- Increased Braid Density For Fuller Coverage
- High Abrasion Resistance
- Temp Range -75°C to 125°C
- Melt Temp 230°C
Specifications
PHYSICAL PROPERTIES |
---|
Monofilament Diameter: | 0.2 mm |
Flammability Rating: | UL94 |
Recommended Cutting: | Scissor/Hot Knife |
Colors: | 2 |
Wall Thickness: | 0.61 mm |
Tensile Strength: | 7.5 |
Abrasion Resistance: | Medium |
Specific Gravity: | 1.38 |
Moisture Absorption Percent (%): | 0.1 - 0.2 |
HARD VACCUUM DATA |
---|
TML: | 0.19 |
CVCM: | 0.00 |
WVR: | 0.16 |
Smoke D-Max: | 56 |
Outgassing: | Med |
Oxygen Index: | 21 |
OPERATING TEMPERATURES |
---|
Minimum Continuous: | -94 ºF / -70 ºC |
Maximum Continuous: | 257 ºF / 125 ºC |
Melt: | 482 ºF / 250 ºC |
CHEMICAL RESISTANCE |
---|
1 = No Effect, 2 = Little Effect, 3 = Affected, 4 = More Affected, 5 = Severely Affected |
---|
Aromatic Solvents: | 2 |
Aliphatic Solvents: | 1 |
Chlorinated Solvents: | 3 |
Weak Bases: | 1 |
Salts: | 1 |
Strong Bases: | 2 |
Salt Water: | 1 |
Hydraulic Fluid: | 1 |
Lube Oil: | 1 |
De-Icing Fluid: | 1 |
Strong Acids: | 3 |
Strong Oxidants: | 2 |
Esters / Ketones: | 1 |
UV Light: | 1 |
Petroleum: | 1 |
Fungus: | 1 |
OTHER INFORMATION |
---|
Halogen Free: | Yes |
ROHS: | Yes |
SVHC: | None |
UL: | Yes |