Insultherm® Tru-Fit - 7 AWG
Insultherm® Tru-Fit is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200°F may be encountered.
Tru-Fit is used as primary insulation on low voltage applications such as leads in toasters, coffee makers, ranges and other appliances. FGL may also be used as insulation and protection for small heaters and resistors that operate at high temperatures, and to insulate over soldered connections when exposure to solder melt temperatures is possible.
Insultherm® Tru-Fit provides a sturdy, long lasting and inexpensive insulation solution. It is flexible and expandable, and can easily be installed over applications with irregular shapes and tight turns.
Specifications
PHYSICAL PROPERTIES | |
Monofilament Diameter: | N/A |
Flammability Rating: | VW-1 |
Recommended Cutting: | Scissor |
Colors: | 2 |
Wall Thickness: | 0.006 - 0.016 " |
Abrasion Resistance: | Medium |
Specific Gravity: | 1.0 - 1.8 |
Moisture Absorption Percent (%): | 0.01 |
HARD VACCUUM DATA | |
TML: | .02 |
CVCM: | .01 |
WVR: | .00 |
Outgassing: | Low |
OPERATING TEMPERATURES | |
Minimum Continuous: | -94 ºF / -70 ºC |
Maximum Continuous: | 1202 ºF / 650 ºC |
Melt: | 2048 ºF / 1120 ºC |
CHEMICAL RESISTANCE | |
1 = No Effect, 2 = Little Effect, 3 = Affected, 4 = More Affected, 5 = Severely Affected | |
Aromatic Solvents: | 1 |
Aliphatic Solvents: | 1 |
Chlorinated Solvents: | 1 |
Weak Bases: | 1 |
Salts: | 1 |
Strong Bases: | 1 |
Salt Water: | 1 |
Hydraulic Fluid: | 1 |
Lube Oil: | 1 |
De-Icing Fluid: | 1 |
Strong Acids: | 2 |
Strong Oxidants: | 2 |
Esters / Ketones: | 1 |
UV Light: | 2 |
Petroleum: | 1 |
Fungus: | 1 |
OTHER INFORMATION | |
Halogen Free: | Yes |
ROHS: | Yes |
SVHC: | None |
UL: | Yes |