Shrinkflex® 4:1 Dual Wall Adhesive
Dual wall adhesive lined heatshrink tubing is ideal for producing strong, weather tight seals on any heatshrink installation. During the application of heat from a heat gun or other hot air tool, the inner adhesive wall melts and flows, creating an adhesion layer to ensure a snug fit to your harness or connector.
Shrinkflex adhesive lined heatshrink tubing has a 4:1 shrink in 4' precut sticks.
Specifications
PHYSICAL PROPERTIES | |
Flammability Rating: | N/A |
Recommended Cutting: | Scissor |
Colors: | 2 |
Tensile Strength: | 1500 |
Elongation Percent (%): | 200% |
Abrasion Resistance: | N/A |
Secant Modulus Psi: | 25,000 |
Longitudinal Change Percent (%): | +5, -15 |
OPERATING TEMPERATURES | |
Minimum Continuous: | -67 ºF / -55 ºC |
Maximum Continuous: | 275 ºF / 135 ºC |
Melt: | 392 ºF / 200 ºC |
CHEMICAL RESISTANCE | |
1 = No Effect, 2 = Little Effect, 3 = Affected, 4 = More Affected, 5 = Severely Affected | |
Aromatic Solvents: | 0 |
Aliphatic Solvents: | 0 |
Chlorinated Solvents: | 0 |
Weak Bases: | 0 |
Salts: | 0 |
Strong Bases: | 0 |
Salt Water: | 0 |
Hydraulic Fluid: | 0 |
Lube Oil: | 0 |
De-Icing Fluid: | 0 |
Strong Acids: | 0 |
Strong Oxidants: | 0 |
Esters / Ketones: | 0 |
UV Light: | 0 |
Petroleum: | 0 |
Fungus: | 0 |
ELECTRIC | |
Dielectric Strength: | 500 |
Volume Resistivity: | 1.0 x 10¹⁴ |