CAT6A 23AWG (Solid Copper) F/UTP–Purple LSFH–CPR Dca

• F/UTP Cable (foiled cable with unfoiled pairs)
• Solid copper inner conductor (23AWG)
• Compatible with PoE/PoE+ (Power over Ethernet) technology, allowing the cable to power network devices
• PE (Polyethylene) copper conductor insulation, 1.14mm diameter
• Aluminium foil + polyester between ground cable and outer cable sheath
• CuSn ground cable
• LSFH (Low Smoke Free of Halogen) outer sheath, 0.50mm thick and 7.3mm diameter
• 72% nominal speed

Category 6A

Data cable category Cat 6A (augmented) has its origins on Cat 6 and it is backwards compatible, with the standards of the inferior categories (Cat 6/5e and Cat 3). Category 6A evolves over category 6, allowing to achieve transmission frequencies of up to 500 MHz (in each pair) and 10 Gbps of throughput. It includes characteristics and specifications to avoid crosstalk and noise. This type of data cable can be used in 10BASE-T, 100BASE-T, 1000BASE-T and 10GBASE-T compliant systems.

Our category 6A cables are characterized for:

• Comply with TIA/EIA-568B.2-1
• Transfer rate up to 10Gbps
• Frequency range of up to 650 MHz (higher than the 500 MHz specified by the standard)
• Nominal impedance of 100 ohms
• Maximum resistance per conductor below 9.38 ohms/100m

Compatibility of RJ45 connectors with Televes data cables:

OK Compatible
OK* Compatible, but there are better choices
X Incompatible
** Mechanical compatibility