H3A Shrinkflex 3:1 Red Dual Wall Adhesive 4ft Stick
Techflex H3A Sizes available 1/8" 3/16" 1/4" 3/8" 1/2" 3/4" 1" 1.5"
Dual wall adhesive lined heatshrink tubing is ideal for producing strong, weather tight seals on any heatshrink installation. During the application of heat from a heat gun or other hot air tool, the inner adhesive wall melts and flows, creating an adhesion layer to ensure a snug fit to your harness or connector.
Shrinkflex adhesive lined heatshrink tubing has a 3:1 shrink ratio
Techflex H3A Sizes available 1/8" 3/16" 1/4" 3/8" 1/2" 3/4" 1" 1.5"
Dual wall adhesive lined heatshrink tubing is ideal for producing strong, weather tight seals on any heatshrink installation. During the application of heat from a heat gun or other hot air tool, the inner adhesive wall melts and flows, creating an adhesion layer to ensure a snug fit to your harness or connector.
Shrinkflex adhesive lined heatshrink tubing has a 3:1 shrink ratio
Certifications:
Specifications
| PHYSICAL PROPERTIES | |
|---|---|
| Flammability Rating: | N/A |
| Recommended Cutting: | Scissor |
| Colors: | 4 |
| Tensile Strength: | 1500 |
| Elongation Percent (%): | 200% |
| Abrasion Resistance: | N/A |
| Longitudinal Change Percent (%): | +5, -15 |
| OPERATING TEMPERATURES | |
|---|---|
| Minimum Continuous: | -67 ºF / -55 ºC |
| Maximum Continuous: | 275 ºF / 135 ºC |
| Melt: | 392 ºF / 200 ºC |
| CHEMICAL RESISTANCE | |
|---|---|
| 1 = No Effect, 2 = Little Effect, 3 = Affected, 4 = More Affected, 5 = Severely Affected | |
| Aromatic Solvents: | 0 |
| Aliphatic Solvents: | 0 |
| Chlorinated Solvents: | 0 |
| Weak Bases: | 0 |
| Salts: | 0 |
| Strong Bases: | 0 |
| Salt Water: | 0 |
| Hydraulic Fluid: | 0 |
| Lube Oil: | 0 |
| De-Icing Fluid: | 0 |
| Strong Acids: | 0 |
| Strong Oxidants: | 0 |
| Esters / Ketones: | 0 |
| UV Light: | 0 |
| Petroleum: | 0 |
| Fungus: | 0 |
| ELECTRIC | |
|---|---|
| Dielectric Strength: | 500 |
| Volume Resistivity: | 1.0 x 10 14 |