H3A Shrinkflex 3:1 Blue Dual Wall Adhesive 4ft Stick
Techflex H3A
Dual wall adhesive lined heatshrink tubing is ideal for producing strong, weather tight seals on any heatshrink installation. During the application of heat from a heat gun or other hot air tool, the inner adhesive wall melts and flows, creating an adhesion layer to ensure a snug fit to your harness or connector.
Shrinkflex adhesive lined heatshrink tubing has a 3:1 shrink ratio
Techflex H3A
Dual wall adhesive lined heatshrink tubing is ideal for producing strong, weather tight seals on any heatshrink installation. During the application of heat from a heat gun or other hot air tool, the inner adhesive wall melts and flows, creating an adhesion layer to ensure a snug fit to your harness or connector.
Shrinkflex adhesive lined heatshrink tubing has a 3:1 shrink ratio
Certifications:
Specifications
PHYSICAL PROPERTIES | |
---|---|
Flammability Rating: | N/A |
Recommended Cutting: | Scissor |
Colors: | 4 |
Tensile Strength: | 1500 |
Elongation Percent (%): | 200% |
Abrasion Resistance: | N/A |
Longitudinal Change Percent (%): | +5, -15 |
OPERATING TEMPERATURES | |
---|---|
Minimum Continuous: | -67 ºF / -55 ºC |
Maximum Continuous: | 275 ºF / 135 ºC |
Melt: | 392 ºF / 200 ºC |
CHEMICAL RESISTANCE | |
---|---|
1 = No Effect, 2 = Little Effect, 3 = Affected, 4 = More Affected, 5 = Severely Affected | |
Aromatic Solvents: | 0 |
Aliphatic Solvents: | 0 |
Chlorinated Solvents: | 0 |
Weak Bases: | 0 |
Salts: | 0 |
Strong Bases: | 0 |
Salt Water: | 0 |
Hydraulic Fluid: | 0 |
Lube Oil: | 0 |
De-Icing Fluid: | 0 |
Strong Acids: | 0 |
Strong Oxidants: | 0 |
Esters / Ketones: | 0 |
UV Light: | 0 |
Petroleum: | 0 |
Fungus: | 0 |
ELECTRIC | |
---|---|
Dielectric Strength: | 500 |
Volume Resistivity: | 1.0 x 10 14 |