Fast, stable, reliable and safe broadband around the home using existing TV coax cable and TV points.

Ethernet Over Coax

Items: 16 of 6
  • EoC MediaConverter - COAX to 1Gbps IP network

    Triax  EoC MediaConverter - COAX to 1Gbps IP network

    • Watch IPTV services through the new TRIAX EoC MediaConverter
    • Installation cost is kept to a minimum as existing cables can be reused to add reliable
      1Gbps IP network services.
    • Small footprint, and easy to mount behind TV set.
    • Powered by the TV set.
    for pricing
  • EoC Controller 32/2 B

    Triax EoC controller is used as the main unit to control up to 32 endpoints in an EoC system. The controller acts as both an L2 switch for ethernet and as a media converter from ethernet to coax and back to ethernet, allowing both TV and data signals to use the same coax cable. Provided that G.hn and TV signals are controlled within the frequency ranges mentioned below.

    for pricing
  • EoC Controller 64/4 B

    Triax EoC controller is used as the main unit to control up to 64 endpoints in an EoC system. The controller acts as both an L2 switch for ethernet and as a media converter from ethernet to coax and back to ethernet, allowing both TV and data signals to use the same coax cable. Provided that G.hn and TV signals are controlled within the frequency ranges mentioned below. Combining of up to 64 Endpoints is possible on same COAX.

    for pricing
  • EoC Coax WiFi Endpoint

    Triax EoC endpoint with WiFi enables WiFi coverage via coax cables. The endpoint is the last element in a system with an EoC controller, splitting your TV and data signals into WiFi/ethernet for data and coax for TV.

    for pricing
  • EoC Ethernet WiFi Endpoint

    Triax EoC Ethernet WiFi Endpoint, with dual band concurrent Wi-Fi, is used in conjunction with the Triax Ethernet over Coax Controller (EoC) and is intended to provide Wi-Fi access in rooms without Coax cables. This is often the case for rooms such as conference rooms, corridors, lobbies, bars, etc.

    The PoE Access Point is powered via Ethernet (PoE) to make the installation easy and independent of a power outlet. This will require the installation of a e PoE+ compliant Ethernet switch connected to the EoC Controller.

    for pricing
  • 1-200 MHz return path filter

    Triax return path filter is used to bypass amplifiers in a normal coax based TV network on the data frequency of EoC. This allows the data to have a return path and the TV signal to be amplified.

    • Return path 1...200 MHz – no amplification
    • To amplifier 300...862 MHz
    for pricing