Insultherm Tru-Fit is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200°F may be encountered. Tru-Fit is used as primary insulation on low voltage applications such as leads in toasters, coffee makers, ranges and other appliances. FGL may also be used as insulation and protection for small heaters and resistors that operate at high temperatures, and to insulate over soldered connections when exposure to solder melt temperatures is possible. Insultherm Tru-Fit provides a sturdy, long lasting and inexpensive insulation solution. It is flexible and expandable, and can easily be installed over applications with irregular shapes and tight turns.

Insultherm Tru Fit

  • Insultherm Tru-Fit Fiberglass Sleeving, (.511mm) 24 AWG

    Insultherm Tru-Fit Fiberglass Sleeving, (.56mm) 24 AWG is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200°F may be encountered.
    Please contact us for shorter lengths

    • £42.00
    Sorry, we only have 1000 of that item available
  • Insultherm® Tru-Fit - 6 AWG

    Fiberglass Sleeving Insulator on Low Voltage Applications

    • £30.00
    Sorry, we only have 999 of that item available
  • Insultherm® Tru-Fit - 3/8"

    Fiberglass Sleeving Insulator on Low Voltage Applications

    • £39.00
    Sorry, we only have 1000 of that item available
  • Insultherm® Tru-Fit - 7/16" - 11.1mm

    Fiberglass Sleeving Insulator on Low Voltage Applications

    • £50.00
    Sorry, we only have 1000 of that item available
  • Insultherm® Tru-Fit - 15.88mm - 5/8"

    Fiberglass Sleeving Insulator on Low Voltage Applications

    • £74.00
    Sorry, we only have 1000 of that item available
  • Insultherm® Tru-Fit - 25.4mm - 1"

    25.4mm - 1" Insultherm Tru-Fit is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200°F may be encountered 

    • £134.00
    Sorry, we only have 1000 of that item available
  • Insultherm® Tru-Fit - 19mm - 3/4"

    19mm - 3/4" Insultherm Tru-Fit is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200°F may be encountered 

    • £85.00
    Sorry, we only have 1000 of that item available
  • Insultherm® Tru-Fit - 12.7mm - 1/2"

    12.7mm - 1/2" Insultherm Tru-Fit is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200°F may be encountered 

    • £60.00
    Sorry, we only have 1000 of that item available
  • Techflex Insultherm® Tru-Fit - 4 AWG - 5.189mm

    Insultherm® Tru-Fit is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200°F may be encountered.

    • £37.00
    Sorry, we only have 984 of that item available
  • Insultherm® Tru-Fit - 7.348mm - 1AWG

    Insultherm® Tru-Fit is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200°F may be encountered.

    • £28.00
    Sorry, we only have 1000 of that item available
  • Insultherm® Tru-Fit - 8.25mm - 0AWG

    Insultherm® Tru-Fit is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200°F may be encountered.

    • £30.00
    Sorry, we only have 1000 of that item available
  • Insultherm® Tru-Fit - 2 AWG -6.544MM

    Insultherm® Tru-Fit is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200°F may be encountered.

    • £41.00
    Sorry, we only have 1000 of that item available
  • Insultherm® Tru-Fit - 2.305mm - FGLG.11

    Insultherm® Tru-Fit is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200°F may be encountered.

    Tru-Fit is used as primary insulation on low voltage applications such as leads in toasters, coffee makers, ranges and other appliances. FGL may also be used as insulation and protection for small heaters and resistors that operate at high temperatures, and to insulate over soldered connections when exposure to solder melt temperatures is possible.

    Insultherm® Tru-Fit provides a sturdy, long lasting and inexpensive insulation solution. It is flexible and expandable, and can easily be installed over applications with irregular shapes and tight turns.

    • £24.00
    Sorry, we only have 1000 of that item available
  • Insultherm® Tru-Fit - 2.906mm - 9 AWG

    Fiberglass Sleeving Insulator on Low Voltage Applications

    Insultherm® Tru-Fit is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200°F may be encountered.

    Tru-Fit is used as primary insulation on low voltage applications such as leads in toasters, coffee makers, ranges and other appliances. FGL may also be used as insulation and protection for small heaters and resistors that operate at high temperatures, and to insulate over soldered connections when exposure to solder melt temperatures is possible.

    Insultherm® Tru-Fit provides a sturdy, long lasting and inexpensive insulation solution. It is flexible and expandable, and can easily be installed over applications with irregular shapes and tight turns.

    • £43.00
    Sorry, we only have 1000 of that item available
  • Insultherm® Tru-Fit - 7 AWG

    Insultherm® Tru-Fit  is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200°F may be encountered. 

    • £28.00
    Sorry, we only have 1000 of that item available
  • Insultherm® Tru-Fit - 5 AWG

    Insultherm® Tru-Fit is a braided fiberglass sleeving which has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. FGL is engineered for applications where temperatures as high as 1,200°F may be encountered. 

    • £32.00
    Sorry, we only have 1000 of that item available

Footer navigation