Flexo® Halar® - 9.53mm - 3/8"
3/8" Halar® self-extinguishing sleeving is used where flammability, high temperature endurance and low outgassing are primary concerns. Halar® is braided from 11 mil ethylene chlorotrifluoroethylene (ECTFE) copolymer monofilament.
Because of its low flame spread and smoke generation properties, this product meets UL 2024 and NFPA 262 plenum specifications, carries a UL flame resistance rating of VW-1 and exceeds automotive industry requirements of FMVSS 302, as well as aviation industry requirements of FAR 25.
Halar® resists a wide range of corrosive chemicals and organic solvents, including strong acids, chlorine and aqueous caustics. Halar® ECTFE also maintains useful properties on exposure to cobalt 60 radiation at doses up to 200 megarads.
Specifications
PHYSICAL PROPERTIES Monofilament Diameter: 0.28 mm Flammability Rating: Far 25 - VW-1 Recommended Cutting: Hot Knife Colors: 2 Wall Thickness: 0.71 mm Tensile Strength: 4.3 Abrasion Resistance: Medium Specific Gravity: 1.68 Moisture Absorption Percent (%): 0.02 HARD VACCUUM DATA TML: 0.18 CVCM: 0.02 WVR: 0 Smoke D-Max: 94 Outgassing: Low Oxygen Index: 64 OPERATING TEMPERATURES Minimum Continuous: -103 ºF / -75 ºC Maximum Continuous: 302 ºF / 150 ºC Melt: 482 ºF / 250 ºC CHEMICAL RESISTANCE 1 = No Effect, 2 = Little Effect, 3 = Affected, 4 = More Affected, 5 = Severely Affected Aromatic Solvents: 1 Aliphatic Solvents: 1 Chlorinated Solvents: 1 Weak Bases: 1 Salts: 1 Strong Bases: 1 Salt Water: 1 Hydraulic Fluid: 1 Lube Oil: 1 De-Icing Fluid: 1 Strong Acids: 1 Strong Oxidants: 1 Esters / Ketones: 2 UV Light: 1 Petroleum: 1 Fungus: 1 OTHER INFORMATION Halogen Free: No ROHS: Yes SVHC: None UL: Yes