Flexo® Halar® - 31.75mm - 1.25"
1.25" - 31.75mm Halar® self-extinguishing sleeving is used where flammability, high temperature endurance and low outgassing are primary concerns. Halar® is braided from 11 mil ethylene chlorotrifluoroethylene (ECTFE) copolymer monofilament.
Because of its low flame spread and smoke generation properties, this product meets UL 2024 and NFPA 262 plenum specifications, carries a UL flame resistance rating of VW-1 and exceeds automotive industry requirements of FMVSS 302, as well as aviation industry requirements of FAR 25.
Halar® resists a wide range of corrosive chemicals and organic solvents, including strong acids, chlorine and aqueous caustics. Halar® ECTFE also maintains useful properties on exposure to cobalt 60 radiation at doses up to 200 megarads.
Specifications
PHYSICAL PROPERTIES | |
---|---|
Monofilament Diameter: | 0.28 mm |
Flammability Rating: | Far 25 - VW-1 |
Recommended Cutting: | Hot Knife |
Colors: | 2 |
Wall Thickness: | 0.71 mm |
Tensile Strength: | 4.3 |
Abrasion Resistance: | Medium |
Specific Gravity: | 1.68 |
Moisture Absorption Percent (%): | 0.02 |
HARD VACCUUM DATA | |
---|---|
TML: | 0.18 |
CVCM: | 0.02 |
WVR: | 0 |
Smoke D-Max: | 94 |
Outgassing: | Low |
Oxygen Index: | 64 |
OPERATING TEMPERATURES | |
---|---|
Minimum Continuous: | -103 ºF / -75 ºC |
Maximum Continuous: | 302 ºF / 150 ºC |
Melt: | 482 ºF / 250 ºC |
CHEMICAL RESISTANCE | |
---|---|
1 = No Effect, 2 = Little Effect, 3 = Affected, 4 = More Affected, 5 = Severely Affected | |
Aromatic Solvents: | 1 |
Aliphatic Solvents: | 1 |
Chlorinated Solvents: | 1 |
Weak Bases: | 1 |
Salts: | 1 |
Strong Bases: | 1 |
Salt Water: | 1 |
Hydraulic Fluid: | 1 |
Lube Oil: | 1 |
De-Icing Fluid: | 1 |
Strong Acids: | 1 |
Strong Oxidants: | 1 |
Esters / Ketones: | 2 |
UV Light: | 1 |
Petroleum: | 1 |
Fungus: | 1 |
OTHER INFORMATION | |
---|---|
Halogen Free: | No |
ROHS: | Yes |
SVHC: | None |
UL: | Yes |