Techflex 1/2" Insultherm
Insultherm is an extremely high temperature resistant sleeve commonly used as thermal protection for wires, cables and hoses that are subjected to continuous and extreme high temperature environments, such as engine manifolds and exhaust systems.
Insultherm is braided from fiberglass yarns and saturated with high temperature resins that improve the product's stability and minimize irritating fiberglass dusting during cutting and installation. The sleeving is tough and durable, maintaining its tight structure under extreme vibration, abrasion, mechanical stress and temperature variations.
Insultherm is available in a wide range of diameters. It cuts cleanly with scissors and installs easily over a variety of applications to either deflect or retain heat in environments up to 1,200°F.
asy to Install-Cuts With Scissors Asbestos Free Resists Gasoline and Engine Chemicals
Specifications
PHYSICAL PROPERTIES | |
---|---|
Monofilament Diameter: | N/A |
Flammability Rating: | VW-1 |
Recommended Cutting: | Scissor |
Colors: | 2 |
Wall Thickness: | 0.031 - 0.061 " |
Abrasion Resistance: | High |
Specific Gravity: | 1.0 - 1.8 |
Moisture Absorption Percent (%): | 0.01 |
HARD VACCUUM DATA | |
---|---|
TML: | .02 |
CVCM: | .01 |
WVR: | .00 |
Outgassing: | Low |
OPERATING TEMPERATURES | |
---|---|
Minimum Continuous: | -94 ºF / -70 ºC |
Maximum Continuous: | 1202 ºF / 650 ºC |
Melt: | 2048 ºF / 1120 ºC |
CHEMICAL RESISTANCE | |
---|---|
1 = No Effect, 2 = Little Effect, 3 = Affected, 4 = More Affected, 5 = Severely Affected | |
Aromatic Solvents: | 1 |
Aliphatic Solvents: | 1 |
Chlorinated Solvents: | 1 |
Weak Bases: | 1 |
Salts: | 1 |
Strong Bases: | 1 |
Salt Water: | 1 |
Hydraulic Fluid: | 1 |
Lube Oil: | 1 |
De-Icing Fluid: | 1 |
Strong Acids: | 2 |
Strong Oxidants: | 2 |
Esters / Ketones: | 1 |
UV Light: | 2 |
Petroleum: | 1 |
Fungus: | 1 |
OTHER INFORMATION | |
---|---|
Halogen Free: | Yes |
ROHS: | Yes |
SVHC: | None |
UL: | Yes |