By adjusting the physical characteristics of the polyethylene
terepthalate filaments, the engineers at Techflex have produced a
product with the same specifications of our PT with the unique
advantage of being able to cut the material with ordinary scissors and
still maintain an extraordinarily fray-resistant end.
FLEXO CLEAN CUT (CC) is ideal for field installers and other situations where access to a hot knife is impossible. CC's fray-resistant properties allows frequent expansion at the cut end without unraveling. When cut with a hot knife, CC produces a virtually frayless end.
Specifications
| PHYSICAL PROPERTIES |
|---|
| Monofilament Diameter: | 0.008 " |
| Flammability Rating: | UL94 |
| Recommended Cutting: | Scissor/Hot Knife |
| Colors: | 2 |
| Wall Thickness: | 0.024 " |
| Tensile Strength: | 7.5 |
| Abrasion Resistance: | Medium |
| Specific Gravity: | 1.38 |
| Moisture Absorption Percent (%): | 0.1 - 0.2 |
| HARD VACCUUM DATA |
|---|
| TML: | 0.19 |
| CVCM: | 0.00 |
| WVR: | 0.16 |
| Smoke D-Max: | 56 |
| Outgassing: | Med |
| Oxygen Index: | 21 |
| OPERATING TEMPERATURES |
|---|
| Minimum Continuous: | -94 ºF / -70 ºC |
| Maximum Continuous: | 257 ºF / 125 ºC |
| Melt: | 482 ºF / 250 ºC |
| CHEMICAL RESISTANCE |
|---|
| 1 = No Effect, 2 = Little Effect, 3 = Affected, 4 = More Affected, 5 = Severely Affected |
|---|
| Aromatic Solvents: | 2 |
| Aliphatic Solvents: | 1 |
| Chlorinated Solvents: | 3 |
| Weak Bases: | 1 |
| Salts: | 1 |
| Strong Bases: | 2 |
| Salt Water: | 1 |
| Hydraulic Fluid: | 1 |
| Lube Oil: | 1 |
| De-Icing Fluid: | 1 |
| Strong Acids: | 3 |
| Strong Oxidants: | 2 |
| Esters / Ketones: | 1 |
| UV Light: | 1 |
| Petroleum: | 1 |
| Fungus: | 1 |
| OTHER INFORMATION |
|---|
| Halogen Free: | Yes |
| ROHS: | Yes |
| SVHC: | None |
| UL: | Yes |
