Audio Over Cat

Items: 5 | 
Items per page:
Drop items here to shop
Product has been added to your cart
  • CYP PU-304-KIT is designed to send digital audio signals over 150m over CAT5e/6 cable infrastructure. This device supports both Coaxial and Optical signals and can transmit these signals up to 150m. The PU-304-KIT can be powered using a USB cable or the supplied PSU adaptor for added flexibility in a compact design. Digital SPDIF signals are supported up to a sample rate of 96Khz, and support for Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.
    for pricing
  • CYP PU-305BDA-TX is an analogue Stereo over CAT5e/6/7 Transmitter which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over Ethernet (PoE) function can power the receiver unit eliminating the need for a second power supply. As the unit has bi-directional capabilities, this device can also receive audio signals back from the connected receiver. This transmitter is designed to be used with the PU-305BDA-RX Analogue Audio Receiver or the PU-305BD-RX Digital Audio Receiver. When combined with the PU-305BD-RX digital receiver, the analogue audio signal will be converted and outputted as digital audio by the receivers' built-in digital to analogue converter (DAC).
    for pricing
  • PU-305BD-KIT Bi-Directional Digital Audio over Single CAT Extender set
    for pricing
  • CYP PU-305BDA-RX is an analogue Stereo over CAT5e/6/7 Receiver which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over Ethernet (PoE) function can power the receiver unit eliminating the need for a second power supply. As the unit has bi-directional capabilities, this device can also send audio signals back to the connected transmitter. This receiver is designed to be used with the PU-305BDA-TX Analogue Audio Transmitter or the PU-305BD-TX Digital Audio Transmitter. When combined with the PU-305BD-TX digital transmitter, the analogue audio signal will be converted and outputted as digital audio by the transmitters' built-in digital to analogue converter (DAC).
    for pricing
  • Bobcat-A delivers Stereo Audio on Cat 5 or Cat 6 cable. Supplied individually.
    for pricing