3/4" Techflex Non-Skid
3/4" Non Skid Techflex is engineered primarily for wire and cable management in smooth floor, high traffic environments such as broadcast studios where someone might inadvertently step on a cable snake and slip.
- Manages and Protects Cable Snakes
- Increases Safety in High Traffic Areas
- Economical & Easy to Install
- Cut & Abrasion Resistant Expands up to 150%
FLEXO NON-SKID (NS) is a unique combination of our standard PET material braided together with a matching thread of a high-friction polymer.
As long as there’s no excessive pressure on cables protected with NS, the entire snake glides easily and quietly along the floor. When local pressure is applied, such as someone stepping on the cable, the high friction material comes in contact with the floor and reduces the possibility of the cable sliding out from underfoot.
NS is substantially less “slippery” than our regular PET, yet provides the same level of flexibility and protection from cable wear and abrasion.
Specifications
| PHYSICAL PROPERTIES | |
|---|---|
| Monofilament Diameter: | 0.028 " |
| Recommended Cutting: | Hot Knife |
| Colors: | 3 |
| Wall Thickness: | 0.07 " |
| Abrasion Resistance: | Medium |
| Specific Gravity: | 1.38 |
| Moisture Absorption Percent (%): | 0.1 - 0.2 |
| OPERATING TEMPERATURES | |
|---|---|
| Minimum Continuous: | -40 ºF / -40 ºC |
| Maximum Continuous: | 175 ºF / 79 ºC |
| Melt: | 260 ºF / 126 ºC |
| CHEMICAL RESISTANCE | |
|---|---|
| 1 = No Effect, 2 = Little Effect, 3 = Affected, 4 = More Affected, 5 = Severely Affected | |
| Aromatic Solvents: | 2 |
| Aliphatic Solvents: | 1 |
| Chlorinated Solvents: | 3 |
| Weak Bases: | 1 |
| Salts: | 1 |
| Strong Bases: | 2 |
| Salt Water: | 1 |
| Hydraulic Fluid: | 1 |
| Lube Oil: | 1 |
| De-Icing Fluid: | 1 |
| Strong Acids: | 3 |
| Strong Oxidants: | 2 |
| Esters / Ketones: | 1 |
| UV Light: | 1 |
| Petroleum: | 1 |
| Fungus: | 1 |
| OTHER INFORMATION | |
|---|---|
| Halogen Free: | Yes |
| ROHS: | Yes |
| UL: | No |