1.25" Techflex Non-Skid
1.25" Prevent Slips & Falls With This Non-Slip Material
Non-Skid is a unique combination of our standard PET material braided together with high-friction polymer filaments.
Non-Skid is engineered primarily for wire and cable management on smooth floor, high traffic environments such as broadcast studios where someone might inadvertently step on a cable snake and slip.
As long as there’s no excessive pressure on the cables protected with Non-Skid, the entire snake glides easily and quietly along the floor. When local pressure is applied, such as when someone steps on the cable, the high friction material comes in contact with the floor and reduces the possibility of the cable sliding out from underfoot.
Non-Skid is substantially less “slippery” than our regular PET, yet provides the same level of flexibility and protection from cable wear and abrasion.
Specifications
PHYSICAL PROPERTIES | |
Monofilament Diameter: | 0.028 " |
Recommended Cutting: | Hot Knife |
Colors: | 3 |
Wall Thickness: | 0.07 " |
Abrasion Resistance: | Medium |
Specific Gravity: | 1.38 |
Moisture Absorption Percent (%): | 0.1 - 0.2 |
OPERATING TEMPERATURES | |
Minimum Continuous: | -40 ºF / -40 ºC |
Maximum Continuous: | 175 ºF / 79 ºC |
Melt: | 260 ºF / 126 ºC |
CHEMICAL RESISTANCE | |
1 = No Effect, 2 = Little Effect, 3 = Affected, 4 = More Affected, 5 = Severely Affected | |
Aromatic Solvents: | 2 |
Aliphatic Solvents: | 1 |
Chlorinated Solvents: | 3 |
Weak Bases: | 1 |
Salts: | 1 |
Strong Bases: | 2 |
Salt Water: | 1 |
Hydraulic Fluid: | 1 |
Lube Oil: | 1 |
De-Icing Fluid: | 1 |
Strong Acids: | 3 |
Strong Oxidants: | 2 |
Esters / Ketones: | 1 |
UV Light: | 1 |
Petroleum: | 1 |
Fungus: | 1 |
OTHER INFORMATION | |
Halogen Free: | Yes |
ROHS: | Yes |
UL: | No |